Welcome to Huizhou Yuye Silicone Rubber Products Co., Ltd.

National Service Hotline:

18948265255

硅胶制品

Silicone products

Contact Us

Huizhou Yuye Silicone Rubber Products Co., Ltd.

Contact:Mr. Zhou

Phone:18948265255

E-mail:2236711241@qq.com

Address:Ligang Village, Zhonggangda, Shiwan Town, Boluo County

Website:www.yuyerubber.com

Common problem

Your current location: HOME > NEWS CENTER > Common problem >

How to clean silicone rubber mold

Release date:2018-11-28 Click:

In the silicone rubber or silicone products industry, it is necessary to remove dust from the mold to dry out the good product. However, cleaning the mold has always been a headache, because vulcanized rubber, silicone rubber, and silicone rubber need to be carried out at high temperatures. Some rubber remains in the mold silicone rubber product oil and chemicals, and long-term high temperature coking forms stubborn dirt and is difficult to clean.

In the past, mold cleaners were often not clean enough, so it was necessary to work with metal brushes or sand blasting to eliminate stubborn dirt on the mold, which often caused mold damage. In silicone rubber products mold cleaning, tire mold cleaning, rubber sealing mold cleaning, silicone rubber products mold cleaning and other aspects.
First, the application method:
1. Dispensing method: Please use a small amount of raw material or thinner to coat or paint on the high temperature mold. After 2 to 3 minutes, the dirt will soften and decompose.
2. Impregnation method: The iron trough is filled with raw material liquid or thinner, and is heated at about 95 ° C for about 2 to 3 minutes. Or put the high temperature mold directly into the solution, soak it at room temperature for 2 to 3 minutes, then take it out, then rinse it with water.

Key words:Silicone products, silicone rubber products, silicone manufacturers

Recently Viewed: